Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Des Moines, WA
If you’re weighing a new automatic gate in Des Moines, the terrain usually decides more than the gate does. This is a marine town on Puget Sound just south of Sea-Tac, with hillside lots above the marina, mid-century ramblers and 1960s-70s split-levels, and wet winters that rust steel and swell wood. We install and repair gates across Des Moines for homeowners, HOA managers and commercial property owners, and we work on the brand already on your property. Call (855) 360-7358 for a free estimate.
Why Des Moines Homes Are Different
Des Moines sits on Puget Sound’s marine shoreline, and that single fact shapes almost every gate job here. Prevailing onshore winds carry salt air off the water, and gates in the bluff-top and hillside neighborhoods above the Des Moines Marina corrode faster than anywhere inland in King County. Steel tube gates pit at the welds, hinges seize, and operators work harder against metal that no longer moves freely.
Then there’s the slope. On the steep, terraced entries above the marina, the ground itself creeps slowly downhill. We routinely find that the post – not the gate – is the failure point, and a gate hung on a moving post will rack out of plumb no matter how many times you adjust the hinges.
The housing stock adds its own wrinkle. A lot of the drives and side yards hold older wooden or steel chain-link and tube gates that are original to the homes, already rusted or sagging. Wet winters swell wood gates until they stick; summer sun dries and warps them. Expect gate adjustment as a normal yearly cycle in Des Moines, not a sign something went wrong.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Des Moines Services
Two jobs come up more than any other in Des Moines: getting a tired gate moving again, and getting an automatic operator back online after salt and slope have done their work.
Gate Repair in Des Moines
Manual and automated gate repair in Des Moines usually starts with a gate that won’t close the last few inches, or one that drags on the ground through the wet months. Because so many properties here hold original wooden or steel gates, we spend a lot of time on hinges, posts and bracing rather than on the gate leaf itself. Salt air speeds up the rust on every moving part, and a hillside post that’s crept downhill will pull a gate out of square. We look at how the gate hangs before we touch the hardware. For a closer look at that work, see Gate Repair in Des Moines.
Electric Gate Repair in Des Moines
Electric gate repair in Des Moines sits where mechanics meet wiring, and that’s the part generalists tend to guess at. A motor that strains, reverses for no reason, or trips its limits is often reacting to a gate that’s binding from corrosion, not a failed control board. We test the operator against the gate it’s actually moving, then trace the fault through the power and safety circuit. Whether your property runs a residential-grade operator or a commercial-grade system, we work on the brand that’s already installed. The detail lives on our Electric Gate Repair in Des Moines page.
Gate Installation in Des Moines
Gate installation in Des Moines has to solve two problems at once: salt air that eats hardware and a slope that won’t sit still. The post-war ramblers and 1960s-70s split-levels here mostly have gates original to the house, and when they finally go, it’s the footing and the finish that decide how long the replacement lasts. We handle the full job, from the motor to the hinge, on residential and commercial property alike. You can see the full scope of that work on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You know it’s time when you’re getting out to open a gate on every trip, or when an older operator is straining against a gate that sticks every winter.
What it costs in Des Moines
A typical automatic gate installation in Des Moines runs $3,500 – $8,500 for the gate and operator together, with the written estimate fixing the final price once we’ve measured the site.
How we do it
We measure the opening and check the grade, set posts to proper footing depth for your soil, hang the gate, then mount and program the operator against it, testing the safety edges before we hand over the remotes.
Driveway Gate Installation
Signs you need it
A sagging original wooden or tube gate that no longer clears the drive, or a widening driveway that needs a gate sized to the actual opening, points to a replacement.
What it costs in Des Moines
Figure $2,800 – $7,000 for a driveway gate installation in Des Moines, and we set the exact figure in a written quote after the on-site measure.
How we do it
We lay out the opening on the existing grade, cut and fit the posts, hang the leaf so it clears the drive through its full swing, then finish the steel or seal the wood against the salt air.
What Gate Installation Costs in Des Moines
| Item | Typical range in Des Moines |
|---|---|
| Automatic gate installation (gate and operator) | $3,500 – $8,500 |
| Driveway gate installation | $2,800 – $7,000 |
| Electric gate installation with operator and safety edges | $3,500 – $8,000 |
Does a new gate in Des Moines need a permit?
Often yes, so ask the City of Des Moines before you order anything. Most cities require a permit for a gate in the setback or on a property line, and an HOA may add its own approval.
Can you install a gate on a steep or terraced entry?
Yes, and we do it often above the marina. Sloped entries need deeper footings and a post set against the grade, so the gate hangs true even as the ground creeps over the years.
Brands We Service in Des Moines
We work on the brand that’s already on your gate, and that keeps diagnosis quick rather than trial-and-error. Our technicians are familiar with BFT, Linear, Viking and Ghost Controls among the operators we service, whether residential or commercial. We don’t claim stocked parts, but most jobs get a straight answer on turnaround the same day you call. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Des Moines, WA
| Service | Typical range in Des Moines |
|---|---|
| Automatic gate installation | $3,500 – $8,500 |
| Driveway gate installation | $2,800 – $7,000 |
| Electric gate installation | $3,500 – $8,000 |
What pushes the price up in Des Moines is grade and corrosion: a steep, terraced entry needs deeper footings than a flat lot, and salt-grade hardware and finishes cost more than standard steel. Every price is quoted and agreed before any work starts, so the number on the written estimate is the number you pay.
Neighborhoods We Serve in Des Moines
We cover the bluff-top and hillside streets above the Des Moines Marina, the split-level blocks inland, and the newer infill near the marina and along Pacific Highway. Each has its own pattern: salt-driven rust up on the bluffs, wood gates that swell every winter a little further inland. Fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to most Des Moines addresses quickly. We’re closed Saturday.
- Bluff-top and hillside streets above the Des Moines Marina
- The mid-century rambler blocks inland
- Newer infill near the marina
- Properties along Pacific Highway
Service Area – Cities Near Des Moines
Des Moines sits in the middle of a stretch of shoreline towns, and the same salt air and slope show up all along it. We also work in SeaTac, WA, just up the hill, and Tukwila, WA inland. To the south you’ll find us in Kent, WA, and we cover Lakeland North, WA as well. If you’re not sure whether your address falls in our range, give us a call and we’ll tell you straight.
Serving Des Moines, WA – Our Local Coverage Area
We serve Des Moines and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Des Moines
Fast dispatch runs from 7am to 7pm, Sunday through Friday, and most Des Moines addresses are reached quickly from the surrounding area. We’re closed Saturday. Call (855) 360-7358 and we’ll book you into the next opening.
Often one or both. Ask the City of Des Moines about permits for anything on a property line or in a setback, and check with your HOA before you order a style. We’ll tell you what the job needs once we’ve seen the site.
All of Des Moines, from the hillside neighborhoods above the marina to the blocks along Pacific Highway. If you’re just outside the city line, ask us and we’ll confirm whether your address sits in our service range.
Call (855) 360-7358 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to your gate. Whether you’re replacing a rusted original on a hillside lot above the marina or getting an electric operator working again, we’ll measure, quote and agree the price before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Des Moines Customers Say
"Second time using them. Same guy, same good work."
- Eric Barrett"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Jennifer Whitaker"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Mark Norris