Gate Repair in Kent - Fixed Today, No Surprise Invoice

Fast, Reliable Gate Repair Across Kent

If your gate is stuck open, dragging across the driveway, or derailing every time the rain returns, we can help. Gate Repair Kent works on residential and commercial gates across Kent, from the East Hill and Kentridge slopes down into the Green River Valley, and we know why gates fail differently in each part of town. Call (855) 360-7358 for a free estimate. We answer 24/7, and hold fast dispatch from 7am to 7pm, Sunday through Friday. You get a written price before any work starts.

Call (855) 360-7358

Why Kent Homeowners Call Gate Repair Kent for Gate Repair

We’re gate specialists, not generalists. Every job we take is a gate job, which is why we can diagnose a binding slide gate or a sagging swing gate quickly instead of guessing at the operator when the real problem sits in the footing. Around Kent, that focus matters: the properties here range from long acreage driveways on the outskirts to dense tract subdivisions on the slopes, and the fixes are rarely the same.

Our technicians have up to 12 years of experience, and they’re familiar with the brands already on your property – DoorKing, Elite, Mighty Mule, LiftMaster and more – so they work on the exact system installed, not around it. Kent is a city split by elevation, and we treat it that way. A gate that binds each January in the valley is a different repair from a gate that sags on an East Hill slope, and we say so up front.

Wrought Iron Gate Repair in Kent

Wrought Iron Gate Repair in Kent usually comes down to the posts, not the ironwork itself. In the low-lying Green River Valley, fog and winter rain keep steel posts persistently damp, so rust creeps into the welds and hinges while the panel stays structurally sound. When a homeowner calls about a gate that drags or latches crooked, we check the post plumb and hinge condition first. A typical wrought iron repair in Kent runs $250 – $650, and a full post reset with re-welding can reach $900 – $1,400. The written estimate sets the final price.

Weld and Rust Repair

Rust at the hinge plates and bottom rail is the most common failure we find on older ornamental gates. We clean back the corrosion, re-weld the weak joints, and treat the steel so it holds through the wet season. Straightening a bent frame is done on site where the gate can be braced safely.

Hinge and Post Reset

When a hinge post gives way, the gate sags even if the panel is fine. We reset the footing to proper depth, re-level the post, and re-hang the gate so it swings true. That fix usually costs less than replacing the gate.

Metal Gate Repair in Kent

Metal Gate Repair in Kent covers the long commercial cantilever and slide gates on the valley’s warehouse and industrial parcels, plus the steel and tubular gates on suburban properties. These gates take a beating from soft alluvial ground that shifts after heavy rain. A typical metal gate repair runs $200 – $550; track and roller replacement for a commercial slide gate lands around $400 – $1,200. We check the post rack and pinion alignment before we touch the operator, because a misaligned track will keep throwing a perfectly good gate off course.

Slide Gate Track and Roller Service

A slide gate that tracked fine in August can bind and derail by January as the valley soil swells. We re-level the track, replace worn rollers, and reset the posts so the gate runs clean through the wet months.

Cantilever and Commercial Hardware

Long cantilever gates on chain-link need heavier hardware than a residential swing gate. We service the carriage, guide rollers, and safety edges, and we re-tension the operator and photocells so the gate cycles reliably.

Trusted Brands We Service in Kent

We’re factory-familiar with nine major gate and operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range covers both residential-grade automation and commercial systems, so a valley warehouse DoorKing and an East Hill Mighty Mule driveway gate are both jobs we take. We don’t claim to stock parts locally – what we bring is brand-specific diagnosis and a fast turnaround on the repair itself, working on the system you already have rather than around it.

Common Gate Repair Problems We See in Kent Homes

• Post rot and footing heave in valley fog. Wood and steel gate posts stay damp through the wet season, so a hinge post gives way and the gate sags while the panel is still sound. Left alone, the sag pulls the operator out of alignment too.
• Valley soil settling under slide gates. Soft alluvial ground shifts after heavy rain, so a cantilever or slide gate that ran clean in summer binds and derails each January. Re-leveling the posts and track fixes what a tune-up can’t.
• Post-1980s tract gate fatigue on the East Hill and Kentridge slopes. Original driveway gates on 20-40 year old subdivisions hit hinge fatigue, plus summer dry spells that warp wood and throw latches out of line. Steeper lots add drainage-driven post movement the flat valley never sees.
• Operator and safety-device failures. Photocells, keypads, and limit switches wear out and leave a gate stuck open or closed. We test the power run and the safety edges before we call the repair done.

Pricing for Gate Repair in Kent, WA

We Also Serve Cities Near Kent

We work across the south King County area, including Covington, Des Moines, Federal Way, and Auburn. If you’re just outside Kent city limits, we can still take a look at your gate. For the full rundown of what we cover, see our gate repair service page, or call (855) 360-7358 to book a free estimate.

FAQs About Gate Repair in Kent

Get Your Gate Back in Service in Kent

Whether it’s a heavy commercial slide gate in the valley or a driveway swing gate on the East Hill, we’ll diagnose the real cause and quote the repair before we start. Call (855) 360-7358 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Gate Repair Kent.